Get The Most From Your Hot Tub
Water care and spa maintenance will ensure you experience many years of pleasure from your hot tub. At Coast Spas Hot Tubs & Outdoor Living we carry a wide selection of hot tub and pool products to protect your investment for years to come. Don’t know what you need? Come in today for a FREE water test. Our Coast Spas professional water lab is there to provide you with a free computer water analysis. Visit us today for all your pool and hot tub maintenance needs.
Sanitation refers to the control of infectious organisms (bacteria, virus, etc.) and the removal of excess organics (perspiration, urine, body oils). Bromine and Chlorine are the only two sanitizers that are approved by Health Canada for use in hot tubs.
Water balance has four factors: pH, Total Alkalinity, Calcium Hardness, and Total Dissolved Solids (TDS). Water balance affects the safety of your equipment as well as the appearance of the water. pH is the most critical, but the Total Alkalinity and Calcium Hardness levels must also be considered. The TDS level of your spa must remain below 1500ppm to easily maintain your water balance. Visit Coast Spas Lifestyles waterlab to test your TDS level for free.
pH is the level of acid or base in the water. pH levels should be monitored frequently. When pH is low it will affect bather comfort. High pH levels will render sanitizers ineffective and will cause scaling on the equipment. Maintain pH between 7.2 and 7.8.
To raise pH:
Once alkalinity level is balanced, if your pH still tets low, pre-dissolve 1 TBSP of Coast Spas pH Up and add to hot tub water. Retest water in 1 hour. If necessary add 1/2 TBSP doses of pH Up until testing indicates that an ideal level has been reached.
To lower pH:
Once alkalinity level is balanced and only if your pH level is high, pre-dissolve 1 TBSP of Coast Spas pH Down and add to hot tub water. Retest water in 1 hour. If necessary add 1/2 TBSP doses of pH Down until an ideal level has been reached.
Test Kit Guidelines
|BROMINE OR CHLORINE INSTRUCTIONS||pH INSTRUCTIONS|
|Follow instructions for high Chlorine or Bromine as above.||Pre-dissolve and add 2 TBSP pH down. Retest in 1 hour.|
|Do not adjust Chlorine or Bromine level.||Do not adjust pH level.|
|Ideal only if you have an ozonator in your hot tub. If not add 1 TBSP of shock per 1000L of water.||Do not adjust pH level.|
|Check dispenser for tablets and add 1 TBSP of shock per 1000L of water.||Do not adjust pH level.|
|0.5 or clear||6.8|
|No Bromine or Chlorine! DO NOT USE HOT TUB! Check dispenser for tablets, add 2 TBSP of shock per 1000L of water.||Add 5 TBSP of Alkalinity Booster per hour until an ideal level is reached. If alkalinity is already balanced add 1 TBSP of pH Up at a time until an ideal level is reached|
Coast Clear is an all natural clarifier. It helps to remove excess minerals from your hot tub water and break down oils. It can also eliminate scum build, which in turn will maximize the filter’s ability to clean the water.
Add 2 TBSP of Coast Clear per 1000L of water to your hot tub once a week.
Suspended particulate matter can cause cloudy water. To keep the water sparkling clear, treat weekly with Coast Spas Clear with the system running.
Other Possible Causes
|Build-Up of organic contaminants||Check Bromine or Chlorine level and adjust accordingly.|
|Total Alkalinity or pH too high:||Check pH and Alkalinity levels and adjust if necessary.|
|Hardness to high:||Add fresh water to your hot tub and add Coast Spas Stain & Scale.|
|High TDS:||Empty your hot tub and refill (have TDS tested at Coast Spas Lifestyles waterlab).|
|Poor filtration:||Clean filter cartridge with Coast Spas Filter Free.|